• admin
• June 11, 2025
• 0 Comments

If your Redmi Pad Pro is stuck in a bootloop, shows “Invalid IMEI,” or has no network, you can fix it yourself by flashing the official firmware and restoring the IMEI if needed.

What Is Stock Firmware?

Stock Firmware (Fastboot ROM) is the official system software provided by Xiaomi.

Flashing it can:

• Fix bootloop or stuck-at-logo problems
• Repair corrupted or missing system files
• Remove root (Magisk) or custom ROMs
• Restore IMEI/network issues
• Improve overall system performance and stability

When Should You Flash?

Flash your Redmi Pad Pro if:

• It’s stuck at the MI logo or in a bootloop
• Displays “Invalid IMEI” or has no network
• Frequently crashes or lags
• You want to unroot or remove a custom ROM
• You need to downgrade the firmware

What You Need

• Official Fastboot ROM (.tgz) for Redmi Pad Pro
• Mi Flash Tool (latest version)
• Xiaomi USB Drivers
• Windows PC + USB-C cable
• Unlocked bootloader
• Full data backup (flashing wipes everything)

How to Flash Redmi Pad Pro – Step-by-Step

Step 1: Download Firmware

• Download the official Fastboot ROM for Redmi Pad Pro (.tgz)
• Extract the archive – the extracted folder must include an “images” subfolder

Step 2: Install Drivers & Tools

• Install Xiaomi USB Drivers
• Install and launch the Mi Flash Tool

Step 3: Enter Fastboot Mode

• Power off your tablet
• Hold Volume Down + Power until you see the Fastboot screen
• Connect the tablet to your PC via USB

Step 4: Flash the ROM

• In Mi Flash Tool:
  • Click “Select”, and choose the extracted ROM folder
  • Set the bottom option to “clean all”
  • Click “Flash”
• Wait 5–10 minutes; the tablet will reboot after flashing

How to Repair IMEI (Redmi Pad Pro – Snapdragon 7s Gen 2)

If the IMEI is missing or invalid, follow this process using QPST + QCN backup.

Warning: Only restore your original IMEI from the SIM tray or packaging. Modifying IMEI is illegal in many countries.

Tools Required:

• QPST Tool (Qualcomm Platform Tool)
• QCN Backup for your Redmi Pad Pro

IMEI Repair Steps:

1. Enable DIAG Mode
   • Turn on USB Debugging
   • On PC, run the command: bashCopyEditadb shell setprop sys.usb.config diag,adb
2. Detect Device in QPST
   • Open QPST Configuration
   • Check if your tablet is detected (COM port visible)
3. Restore QCN File
   • Go to Software Download > Restore tab
   • Load the QCN file
   • Click Start to flash QCN
4. Reboot & Verify
   • Restart the device
   • Dial *#06# (or check Settings > About > Status) to confirm IMEI is restored

Common Problems & Solutions

Issue	Fix
Device not detected	Reinstall drivers or try another USB port
Mi Flash fails	Use different Mi Flash version or verify firmware
IMEI still invalid	Recheck DIAG mode / try another QCN
Bootloop after flash	Boot to Recovery > Wipe Data

Flashing Tips

• Use only the Fastboot ROM (.tgz) — Recovery ROMs (.zip) won’t work here
• Always verify your device model and region before flashing
• Don’t lock the bootloader unless using official stock ROM
• Ensure the battery is 50%+ charged
• Back up all data and the QCN/IMEI before flashing