Redmi Pad SE 4G 8.7
If your Redmi Pad SE 4G 8.7 is facing problems like a bootloop, stuck logo, invalid IMEI, or system lag, flashing the correct stock firmware can fix most issues. For cellular problems, you might also need to repair the IMEI using the right tools.
📱 What is Stock Firmware and Why It’s Important
Stock firmware (also known as stock ROM or flash file) is the official operating system that comes pre-installed from Xiaomi. Flashing it helps:
Restore a soft-bricked device
Fix boot loops or stuck screens
Repair software corruption or bugs
Return to the official MIUI experience
Restore a corrupted or missing IMEI (for 4G models)
🔍 When Should You Flash Redmi Pad SE 4G 8.7?
You should flash if:
It’s stuck on the MI logo or won’t boot
There are software issues after an update
Apps keep crashing or the system is unstable
You want to unroot or remove a custom ROM
The device shows “No service” or “Invalid IMEI”
The system is very slow or buggy
✅ Requirements Before Flashing
✔️ Correct Fastboot ROM for Redmi Pad SE 4G 8.7
✔️ Mi Flash Tool
✔️ Xiaomi USB Drivers
✔️ A Windows PC and USB-C cable
✔️ Bootloader unlocked
✔️ Backup your data
🔧 How to Flash Stock Firmware (Step-by-Step)
Step 1: Download Firmware
Search for: Redmi Pad SE 4G 8.7 (Fastboot ROM)
Choose a firmware version based on your region (Global/India/China)
Download the .tgz Fastboot ROM and extract it
Install Xiaomi USB Drivers on your PC
Extract and install the Mi Flash Tool
Ensure the firmware folder contains an images folder
Step 3: Boot into Fastboot Mode
Power off the tablet
Press and hold Volume Down + Power until the Fastboot screen appears
Connect it to your PC via USB
Step 4: Flash the Firmware
Open Mi Flash Tool as Administrator
Click Select and choose the extracted ROM folder
Choose “clean all” (wipes data)
Click Flash
Wait 5–10 minutes. Once it’s complete, the device will reboot.
📶 How to Repair IMEI on Redmi Pad SE 4G 8.7
If your device shows “Invalid IMEI” , no SIM , or no network , follow these steps:
⚠️ Only write your original IMEI (printed on the box or SIM tray). IMEI tampering is illegal in many countries.
Download SN Writer Tool + DB Files (from your firmware)
Turn off the device and connect in Meta Mode
In SN Writer, enter your IMEI1 and IMEI2
Start the write process
When successful, restart the tablet
Method 2: QCN Write (For Snapdragon Devices)
Enable DIAG mode using ADB: arduinoCopyEditadb shell setprop sys.usb.config diag,adb
Use QPST Tool or QFIL
Load the appropriate QCN file
Write the IMEI using the tool and reboot
🛠 Common Issues & Fixes
Problem Fix Device not detected Reinstall drivers, change USB port/cable Bootloop after flashing Wipe data from stock recovery Flash fails or stuck Try another Mi Flash version IMEI invalid after flash Use correct IMEI tool (SN Writer/QCN)
⚠ Tips for Safe Flashing
Always use official firmware
Double-check your model and region
Flash using Fastboot ROM , not Recovery ROM
Charge battery to at least 50%
Keep backup of your original IMEI and QCN if possible
